cPRx Compeunds is recommnended for the fixing of foamed polystyrene (thermacole), insulex soft boards and fibreglass insulation slabs to all type
of structures where bituminous adhesive is exceptale.
It may be used to stick insulation sheets on to concrete, timber or metal and also to other insulation sheets.
It is suitable for use in cold storages also, to ensure good adhesion to walls and ceiling. It may also be used for sticking.theremacole sections used for the insulation of refrigeration pipe work.
Special grades are available for fixing tiles, linoleum etc.
Application Methodology
Thoroughly clean both the surfaces which are to be stuck together. Particular care should be taken to remove dust and loose particles from concrete or plaster.
Apply CPRX Cempound by brush on both surface and leave to “break” for 15-20 minutes. When the applied film turns dark brown to black, both the surface which are to be stuck together should be pressed firmly.
Apply firm and area even pressure over the whole area which is to be stuck and expel
Precaution
CPRx compeunds requires 24 hrs to obtain the
full bond strength, so no additional work is to be
done on the completed surface for atleast a day.
Packaging
CPRx compounds is availabie in 4 litre and 2U
litre containers.
Storage
When not in actual use, the container should be kept tightly closed to preserve the contents.
Use within 6 months of date of manufature.
entrapped air. The adhesive will hold the sheet in
place immediately, but no attempt should be
made to pull the sheets.
